The layer every other system runs on. Built once, properly, for the next twenty years.
We also do this work in township and public buildings and in multi-site retail.
Structured cabling for commercial buildings across Michigan.
Copper and fiber pathways, racks and terminations installed to the current ANSI/TIA‑568, labeled at both ends, verified link by link, and handed over with the test results and a port map.
We are not tied to a manufacturer. Cable, connectivity and racks are specified for the building and the budget, and the test results have to pass the same limits whichever name is on the box.
What the work looks like when we leave — and why each detail is there.
These are our installations, photographed by our technicians on site. Nothing staged, nothing stock. Each detail is a decision we make on every project, whether the client will ever see it or not.
Pathway
Every run has a route before it has a cable. We fill tray to no more than half its capacity on day one so the building has room to grow, keep data away from power, honor bend radius on every turn, sleeve and firestop every penetration through a rated wall, and color-code by system so a technician can trace a bundle from the ceiling without pulling a single tie. What you see here is the route the network will follow for the next twenty years.
Termination
M-1-1 through M-1-24: the label on the panel matches the label on the faceplate matches the line on the as-built. We terminate to the current ANSI/TIA‑568, keep pair untwist to the minimum, and verify every link before we sign off. Certified test reports on a calibrated tester, with the full report in your closeout package, whenever the specification calls for them. Labels are printed, never handwritten, and applied at both ends. A pass on the tester is the floor, not the standard — a termination that passes but is dressed badly gets redone.
Dressing
A rack is dressed once, properly, or it is dressed badly forever. Patch cords cut to length and routed through managers, vertical bundles combed and Velcro-tied — never zip-tied — service loops where they belong, and nothing crossing the front of a switch. It is not for the photograph. It is so the port you need during an outage is the one you reach for.
Outside plant
Between buildings the pathway is a trench. Conduit goes in with a pull string and, where the budget allows, a spare duct, because a second cable is always cheaper to pull than a second trench. The fiber in it is fusion spliced and tested end to end. Where digging is not practical, a point-to-point wireless bridge carries the link across the lot, or roof to roof.
What you hold at handoff
The closeout package is part of the job, not an extra.
Your closeout package covers the systems in the agreed scope.
Questions we get
Short answers. The long ones happen on the site walk.
Cat6 or Cat6A?
Cat6 carries one gigabit comfortably and 10 gigabits over short runs. Cat6A carries 10 gigabits the full 100 meters and is what we recommend for new construction, wireless access points, and anything you expect to keep for fifteen years. Cat8 is for short, very high-bandwidth links, up to 30 meters, such as copper backbones between racks. For AV gear, including LED wall processors, we run the cable the manufacturer specifies. We price the options and tell you where the difference actually matters in your building.
Do you certify every link?
Every link is verified before handoff. Certified test reports against the ANSI/TIA‑568 limits on a calibrated tester, with the full report in your closeout package, come with the job whenever the specification calls for them. If yours does not, ask for it at the site walk or have it written into the scope. A link that fails is fixed, not explained.
Can you work in an occupied building?
Yes. In occupied buildings we work in zones, off-hours and weekends, around shifts and store hours, protect finishes, and leave the site clean every night. In hospitals, schools and child care centers we meet the facility's vendor requirements — visitor rules, badging, background checks, infection control — before the first day on site.
Do you work from an architect's drawings?
Where an architect or technology consultant has already written the Division 27 documents, we build to them, with submittals and as-builts. Where there are no drawings or specifications, we design to the same standard and put it in writing before we quote.
What about the old cable in the ceiling?
Abandoned cable is a code issue and a fire load. We remove it to code as part of the job, or price it separately if that is all you need done.
Fiber between buildings?
OS2 singlemode or OM4 multimode, fusion spliced, in underground conduit or on existing aerial strand.
Can you test cabling someone else installed?
Yes, as a job on its own. Every link is certified against the ANSI/TIA‑568 limits on a calibrated tester and the report is yours, so you know what you have before you build on it or replace it. Demarc extensions and moves, adds and changes are handled the same way: labeled, tested, documented. How a takeover goes.
The other systems
Cabling is the foundation. These are what run on it.
Tell us about the building. We will walk it with you.
A site walk is free and takes about an hour. What follows is a written scope and a firm, itemized number.
Your building stays your business. We do not publish client names or locations, and what we see on a site walk stays between us.
Outside those hours, the form and the ticket page still reach us. A ticket marked Down is treated as an emergency and goes ahead of scheduled work.
Thank you. We have your request and will be in touch to walk the building with you.
